The Pegasus XV Series stainless steel submersible vortex sewage pumps are designed for residential and commercial sewage, pure water transfer and drainage applications. The Pegasus XV series can be used to transfer unfiltered effluent or raw sewage. The innovative vortex impeller design reduces the risk of clogging problem. Additionally, the Pegasus XV Series features a stainless steel motor frame, pump body and base to prevent corrosion and are designed to provide excellent motor heat dissipation, ensuring long life. Each pump is 100% tested to ensure quality and reliability for years of trouble-free performance.

• Basement water pumping
• Wastewater drainage
• Water transfer
• Drying up
• Wastewater
• Factory wastewater treatment

Operation: Empty residential pits and cesspools

Max temperature pumped liquid: 35°C

Max temperature operating temperature: 40°C

Max time operating time with Q=0: 10s

Density of treated liquid: 998.3

Viscosity of the treated liquid: 1mm²/s

start/hour max. : 7m

Solid passage: 35 ÷ 50mm

Fluid: Sewage, containing faeces

Cable: H07 RNF

Handle: AISI 304 stainless steel + Nylon

Motor cover: AISI 304 stainless steel

Motor housing: AISI 304 stainless steel

Ring: fixing: AISI 304 stainless steel

Pump body: : AISI 304 stainless steel

Mechanical seal: SIC/SIC/NBR

Impeller: AISI 304 stainless steel

Key: AISI 304 stainless steel

Pump housing: AISI 304 stainless steel

Gasket: NBR

V-shaped axial seal: NBR

Trim: AISI 304 stainless steel

Suction flange: AISI 304 stainless steel

The Pegasus SV Series submersible sewage pumps are designed for commercial and industrial sewage transfer and dewatering applications. The Pegasus SV series can be used to transfer unfiltered effluent or raw sewage. The innovative vortex impeller design reduces the risk of clogging problem. Additionally, the Pegasus SV Series features a stainless steel motor frame to prevent corrosion and is designed to provide excellent motor heat dissipation, ensuring long life. As with the Pegasus pump, each is 100% tested to ensure quality and reliability for years of trouble-free performance.

• Wastewater disposal
• Water transfer
• Drying
• Wastewater
• Factory wastewater treatment

Operation: Wastewater / Wastewater

Max temperature pumped liquid: 40°C

Max temperature operating temperature: 40°C

Max time operating time with Q=0: 10s

Density of treated liquid: 998.3

Viscosity of the treated liquid: 1mm²/s

start/hour max. : 7

Solid passage: 35 ÷ 50mm

Fluid: Waste or lightly charged water

Cable: H07 RNF

Handle: Nylon SS 41

Engine cover: CAST IRON GJL 200

Motor housing: CAST IRON GJL 200

Support: GJL 200 CAST IRON

Oil chamber: CAST IRON GJL 200

Pump body: CAST IRON GJL 200

Impeller: CAST IRON GJL 200

Upper mechanical seal: CA/CE

Lower Mechanical Trim: SIC/SIC

Gasket: NBR

Trim: AISI 410 stainless steel

Motor housing: AISI 304 stainless steel

Pegasus SVN series all stainless steel submersible sewage pumps are designed for commercial and industrial sewage transfer, dewatering applications and manufacturing processes that require pure water. The Pegasus SVN series can be used to transfer unfiltered effluent or raw sewage. The innovative vortex impeller design reduces the risk of clogging problem. Additionally, the Pegasus SVN series features a stainless steel motor frame, pump body and base to prevent corrosion and are designed to provide excellent motor heat dissipation, ensuring long life. As with the Pegasus pump, each is 100% tested to ensure quality and reliability for years of trouble-free performance.

• Wastewater disposal
• Water transfer
• Drying
• Wastewater
• Factory wastewater treatment

Operation: Wastewater / Wastewater

Max temperature pumped liquid: 40°C

Max temperature operating temperature: 40°C

Max time operating time with Q=0: 10s

Density of treated liquid: 998.3

Viscosity of the treated liquid: 1mm²/s

start/hour max. : 10

Solid passage: 35 ÷ 50mm

Fluid: Waste water / Charged water

Cable: H07 RNF

Handle: AISI 304 stainless steel

Motor cover: AISI 316 stainless steel

Motor housing: AISI 316 stainless steel

Support: GJL 200 CAST IRON

Oil chamber: AISI 316 stainless steel

Pump body: AISI 316 stainless steel

Impeller: AISI 316 stainless steel

Upper mechanical seal: CA/CE

Lower Mechanical Trim: SIC/SIC

Oil seal: VITON

Trim: AISI 316 stainless steel

Motor housing: AISI 316 stainless steel

With high quality cast iron housing for long time use.To achieve excellent performance, we use excellent VCT cable with epoxy resin base, dry motor and dura-mechanical seals.This series also with ball bearing sturdy and protective ball bearings and insulation level is IP 68.The semi-open centrifugal impeller design which can avoid long fiber items or other objects blocking the entrance.The radial knife and bushing are both made from SUS-440C material in which the hardness is achieved HRc 55-60. All high tenacity objects such as leather, textile, plastic bags and rope are easy to grind.

• Wastewater drainage
• Wastewater transfer

Operation: Wastewater for civil and industrial use

Max temperature pumped liquid: 40°C

Max temperature operating temperature: 40°C

Max time operating time with Q=0: 10s

Density of treated liquid: 998.3

Viscosity of the treated liquid: 1mm²/s

start/hour max. : 7

Solid passage: 35 ÷ 50mm

Fluid: Waste water

Handle: SS41

Bracket: FC 200

High coverage: FC 200

Cutter: SUS 440C

Cutting ring: SUS 440C

Pump housing: FC 200

Sealing box: FC 200

Impeller: FC 200

Motor housing: FC 200

Oil chamber: FC 200

Packing and Rotor: SUS 410

Upper mechanical seal: CA/CE/NBR

Lower mechanical seal: SIC/SIC/NBR

coni single phase submersible sewage pump; : eu for domestic and civil waste water. The SC pump is equipped with an integrated float switch for automatic pumping. The PEGASUS SC series can be used to transfer raw effluxed or unfiltered wastewater. The innovative vortex impeller design reduces the risk of clogging. Additionally, the SC Series features a stainless steel motor frame to prevent corrosion and is coni; : ue to allow great heat dissipation from the motor, ensuring a long service life. Like all PEGASUS pumps, each one is 100% tested to ensure quality and reliability for years of trouble-free performance.

• Wastewater drainage
• Water transfer
• Drying out
• Wastewater
• Factory wastewater treatment

Operation: Wastewater / Wastewater

Max temperature pumped liquid: 40°C

Max temperature operating temperature: 40°C

Max time operating time with Q=0: 10s

Density of treated liquid: 998.3

Viscosity of the treated liquid: 1mm²/s

start/hour max. : 7

Solid passage: 22 ÷ 28mm

Fluid: Waste water / Charged water

Cable: H07RN-F

Handle: Nylon SS 41

Engine cover: CAST GJL 200

Sealing box: CAST IRON GJL 200

Support: GJL 200 CAST IRON

Oil chamber: CAST IRON GJL 200

Pump body: CAST IRON GJL 200

Impeller: CAST IRON GJL 200

Upper mechanical seal: CA/CE

Lower Mechanical Trim: SIC/SIC

Gasket: NBR

Trim: AISI 410 stainless steel

Motor housing: AISI 304 stainless steel

The DG STEEL lifting pump. is an automatic sewage pump is a high performance product. Modern and robust, this pump is particularly suitable for lifting wastewater, rain and infiltration. Capable of absorbing foreign bodies up to 40 mm in diameter, the DG STEEL pump has an all-stainless construction. Fixed or portable installation in vertical position find the use that suits you. Equipped with a float which manages the starting and stopping of the pump.

• Sewage
• Contaminated water with solid bodies
• Lifting stations for the small collective and the collective

Operation: Submerged

Max temperature pumped liquid: 40°C

Max temperature operating temperature: 40°C [90°C max. 3 mins]

Max time operating time with Q=0: 10s

Density of the treated liquid: 1000 kg/m³

Viscosity of the treated liquid: 1mm²/s

Treated liquid pH: 6 ÷ 14

start/hour max. : 30

Solid passage max. : 40mm

Fluid: Waste water / Charged water

Motor casing: AISI-304 stainless steel

Impeller: AISI 304 stainless steel

Screws: Stainless steel – Class A2-70

Standard seals: Rubber – NBR

Shaft: Stainless steel – AISI 431

The DR STEEL pump is a clear or lightly loaded water lifting pump. This cellar pump is intended to be used as an emergency pump or a portable pump thanks to its carrying handle. Capable of absorbing solid bodies up to 12 mm in diameter, this all-stainless steel pump is particularly robust. This submersible type pump remains efficient even when partially uncovered, its cooling system guarantees constant performance. Equipped with a float this pump is automatic, its adjustable level regulator allows the start and stop of the pump.

• Clear or lightly charged water
• Draining of flooded premises
• Watering and transfer of cisterns

Operation: Submerged

Max temperature pumped liquid: 40°C

Max temperature operating temperature: 40°C [90°C max. 3 mins]

Max time operating time with Q=0: 10s

Density of the treated liquid: 1000 kg/m³

Viscosity of the treated liquid: 1mm²/s

Treated liquid pH: 6 ÷ 14

start/hour max. : 30

Solid passage max. :40mm

Fluid: Clear water / lightly charged

Motor casing: AISI-304 stainless steel

Impeller: AISI 304 stainless steel

Screws: Stainless steel – Class A2-70

Standard seals: Rubber – NBR

Shaft: Stainless steel – AISI 431

The AP BLUE PRO clear water lifting pump is particularly recommended in applications requiring high manometric heights. Ideal for water games or fountains, this submersible pump is robust and quiet. Pegasus offers an easy-to-install pump, you can choose the 1 inch ½ G connection or a flange connection.

• Liquids mostly clean or with small solids or sand
• Slightly sandy seepage water
• Ideal for fountains and water features

Operation: Submerged

Max temperature pumped liquid: 40°C

Max temperature operating temperature: 40°C [90°C max. 3 mins]

Max time operating time with Q=0: 10s

Density of the treated liquid: 1000 kg/m³

Viscosity of the treated liquid: 1mm²/s

Treated liquid pH: 6 ÷ 14

start/hour max. : 30

Solid passage max. : 6mm

Fluid: Clear water

Motor casing: Cast iron EN-GJL-250

Impeller: Cast iron EN-GJL-250

Screws: Stainless steel – Class A2-70

Standard seals: Rubber – NBR

Shaft: Stainless steel – AISI 431

Paint: Two-component water-based epoxy

The DG BLUEPRO pump is a single-phase, automatic sewage pump. Modern and robust pump designed for lifting domestic wastewater that can contain foreign bodies up to 40mm thanks to a wide free passage in the pump volute. In fixed or portable installation, this high-tech pump has a double O-ring cable gland system for better sealing. Equipped with a shockproof polypropylene base, this sewage pump is particularly resistant to difficult conditions.

• Sewage
• Contaminated water with solid bodies
• Lifting stations for the small collective and the collective

Operation: Submerged

Max temperature pumped liquid: 40°C

Max temperature operating temperature: 40°C [90°C max. 3 mins]

Max time operating time with Q=0: 10s

Density of the treated liquid: 1000 kg/m³

Viscosity of the treated liquid: 1mm²/s

Treated liquid pH: 6 ÷ 14

start/hour max. : 30

Solid passage max. : 40mm

Fluid: Domestic wastewater

Motor casing: Cast iron EN-GJL-250

Impeller: Cast iron EN-GJL-250

Screws: Stainless steel – Class A2-70

Standard seals: Rubber – NBR

Shaft: Stainless steel – AISI 431

Paint: Two-component water-based epoxy

The DR BLUE PRO pump is a single-phase and automatic lifting pump for clear water. Robust and efficient, this high-tech product finds all its usefulness during floods. Capable of pumping solid bodies up to 15 mm in diameter, this cellar pump is particularly reliable. Its cast iron construction demonstrates the robustness of this pump, the weight of the product is quickly forgotten thanks to a very ergonomic carrying handle. Its cable gland system protects your pump against the tearing of the power cable, in addition it is equipped with a double O-ring for optimal sealing.

• Clear or lightly charged water
• Filtered water, seepage water and groundwater
• Irrigation and installations requiring significant hydraulic performance

Operation: Submerged

Max temperature pumped liquid: 40°C

Max temperature operating temperature: 40°C [90°C max. 3 mins]

Max time operating time with Q=0: 10s

Density of the treated liquid: 1000 kg/m³

Viscosity of the treated liquid: 1mm²/s

Treated liquid pH: 6 ÷ 14

start/hour max. : 30

Solid passage max. : 40mm

Fluid: Clear / waste water / site water

Motor casing: Cast iron EN-GJL-250

Impeller: Cast iron EN-GJL-250

Screws: Stainless steel – Class A2-70

Standard seals: Rubber – NBR

Shaft: Stainless steel – AISI 431

Paint: Two-component water-based epoxy

The GR BLUE PRO pump is a chopper lifting pump for laden water has a starter box and a level float. Its connection by flange or 1 inch ½ thread allows an optimal adaptation to your needs. Its chrome-plated steel shredder system shreds bodies in suspension, be careful, certain applications are not suitable for this type of lifting pump.

• Water loaded with filamentous and fibrous bodies
• Unfiltered wastewater of civil origin
• Lifting stations for the small collective and the collective

Operation: Submerged

Max temperature pumped liquid: 40°C

Max temperature operating temperature: 40°C [90°C max. 3 mins]

Max time operating time with Q=0: 10s

Density of the treated liquid: 1000 kg/m³

Viscosity of the treated liquid: 1mm²/s

Treated liquid pH: 6 ÷ 14

start/hour max. : 30

Solid passage max. : 40mm

Fluid: Clear / loaded / site water

Cable: H07 RNF

Handle: AISI 304 stainless steel + Nylon

Motor cover: AISI 304 stainless steel

Motor housing: AISI 304 stainless steel

Ring: fixing: AISI 304 stainless steel

Pump body: AISI 304 stainless steel

Mechanical seal: SIC/SIC/NBR

Impeller: AISI 304 stainless steel

Key: AISI 304 stainless steel

Pump housing: AISI 304 stainless steel

Gasket: NBR

V-shaped axial seal: NBR

Trim AISI 304 stainless steel

Suction flange: AISI 304 stainless steel