The in-line centrifugal pump can be used for a wide range of applications in the industrial and marine markets. It is designed to pump clean or slightly contaminated low viscosity fluids without the presence of solid or fibrous particles. Common fluids pumped include fresh water, sea water and fuels (diesel, gasoline and kerosene) and common applications include fuel transfer, irrigation, water supply, water treatment water, pressurization, gray water, dewatering, building systems, marine and cooling/heating air conditioning (HVAC).
Operation: Single In-Line Max temperature pumped liquid: 120°C Max temperature operating temperature: 45°C Max time operating time with Q=0: 10s Fluid: Clear Water Viscosity of the treated liquid: 1mm²/s Density of the treated liquid: 998.3 Kg/m³ Content max. of solids: -g/m3
Housing: Gray cast iron EN-GJL-200 / Bronze CuSn10Zn2 (AEP) Sealing flange: EN-GJL-200 / CuSn10Zn2 (AEP) Turbine: EN-GJL-200 / CuSn10Zn2 (AEP) Shaft: AISI 329
Power supply: 220/240V~1 – 380/400V~3 Frequency: 50Hz Power: 0.05 ÷ 1.5kW Poles: 2 / 4 Vertical discharge: G1″ ÷ G11/4″ Pressure class: PN10 ambient temperature max. : 45°C Max flow : 17m3/h Max lifting height : 26m
The in-line centrifugal pump can be used for a wide range of applications in the industrial and marine markets. It is designed to pump clean or slightly contaminated low viscosity fluids without the presence of solid or fibrous particles. Common fluids pumped include fresh water, sea water and fuels (diesel, gasoline and kerosene) and common applications include fuel transfer, irrigation, water supply, water treatment water, pressurization, gray water, dewatering, building systems, marine and cooling/heating air conditioning (HVAC).
Operation: Single In-Line Max temperature pumped liquid: 120°C Max temperature operating temperature: 45°C Max time operating time with Q=0: 2min Fluid: Clear Water Viscosity of the treated liquid: 1mm²/s Density of the treated liquid: 998.3 Kg/m³ Content max. of solids: -g/m3
Housing: Gray cast iron EN-GJL-200 / Nodular cast iron EN-GJS-400 (LH) Housing: Bronze CuSn10Zn2 (LP) / Stainless steel AISI 316 (LS) Sealing flange: EN-GJL-200 / EN-GJS-400 (LH) / CuSn10Zn2 (LP) / AISI 316 (LH) Impeller: EN-GJL-200 / CuSn10Zn2 (LP) / AISI 316 (LS) Shaft: AISI 329
Power supply: 220/240V~1 – 380/400V~3 Frequency: 50Hz Power: 0.05 ÷ 55kW Poles: 2 / 4 Vertical discharge: DN 32 ÷ DN 125 Pressure class: PN10 – PN16 ambient temperature max. : 45°C Max flow : 306m3/h Max lifting height : 82m
The in-line centrifugal pump can be used for a wide range of applications in the industrial and marine markets. It is designed to pump clean or slightly contaminated low viscosity fluids without the presence of solid or fibrous particles. Common fluids pumped include fresh water, sea water and fuels (diesel, gasoline and kerosene) and common applications include fuel transfer, irrigation, water supply, water treatment water, pressurization, gray water, dewatering, building systems, marine and cooling/heating air conditioning (HVAC).
Operation: Single In-Line Max temperature pumped liquid: 120°C Max temperature operating temperature: 45°C Max time operating time with Q=0: 2min Fluid: Clear Water Viscosity of the treated liquid: 1mm²/s Density of the treated liquid: 998.3 Kg/m³ Content max. of solids: -g/m3
Case: Gray cast iron EN-GJL-200 Housing: Bronze CuSn10Zn2 (ALP) / Stainless steel AISI 316 (ALS) Sealing flange: EN-GJL-200 / EN-GJS-400 (ALH) / CuSn10Zn2 (ALP) / AISI 316 (ALH) Impeller: EN-GJL-200 / CuSn10Zn2 (ALP) / AISI 316 (ALS) Shaft: AISI 329
Power supply: 220/240V~1 – 380/400V~3 Frequency: 50Hz Power: 0.55 ÷ 160 kW Poles: 2 / 4 Vertical discharge: DN 100 ÷ DN 300 Pressure class: PN10 – PN16 ambient temperature max. : 45°C Max flow : 936m3/h Max lifting height : 78m
The in-line centrifugal pump can be used for a wide range of applications in the industrial and marine markets. It is designed to pump clean or slightly contaminated low viscosity fluids without the presence of solid or fibrous particles. Common fluids pumped include fresh water, sea water and fuels (diesel, gasoline and kerosene) and common applications include fuel transfer, irrigation, water supply, water treatment water, pressurization, gray water, dewatering, building systems, marine and cooling/heating air conditioning (HVAC).
Operation: Single In-Line Max temperature pumped liquid: 120°C Max temperature operating temperature: 45°C Max time operating time with Q=0: 2min Fluid: Clear Water Viscosity of the treated liquid: 1mm²/s Density of the treated liquid: 998.3 Kg/m³ Content max. of solids: -g/m3
Case: Gray cast iron EN-GJL-200 Housing: Bronze CuSn10Zn2 (ALP) / Stainless steel AISI 316 (ALS) Sealing flange: EN-GJL-200 / EN-GJS-400 (ALH) / CuSn10Zn2 (ALP) / AISI 316 (ALH) Impeller: EN-GJL-200 / CuSn10Zn2 (ALP) / AISI 316 (ALS) Shaft: AISI 329
Power supply: 220/240V~1 – 380/400V~3 Frequency: 50Hz Power: 0.55 ÷ 160 kW Poles: 2 / 4 Vertical discharge: DN 100 ÷ DN 300 Pressure class: PN10 – PN16 ambient temperature max. : 45°C Max flow : 936m3/h Max lifting height : 78m
Ranges
Description
Use
Operating ranges
Operating characteristics
Materials
Range Features
Description
Use
Operating ranges
Operating characteristics
Materials
Range Features
Description
Use
Operating ranges
Operating characteristics
Materials
Range Features
Description
Use
Operating characteristics
Operating characteristics
Materials
Range Features