Engine specifications: 1,500 rpm
Nominal power: 820 kW prp; 902 kW standby
Manufacturer: BAUDOUIN
Model: 12M26G1000
Engine type: 4-stroke diesel
Injection type: Direct
Aspiration type: Turbocharged
Number and arrangement of cylinders: 12 – V
Bore x stroke: 150×150 mm
Total displacement: 31.8 L
Cooling system: Water + 50% Glycol
Engine oil specifications: ACEA E3, E5
Compression ratio: 15.7:1
Fuel consumption ESP: 219.3 l/h
Fuel consumption at 100% PRP: 195.5 l/h
Fuel consumption at 75% PRP: 146.5 l/h
Fuel consumption at 50% PRP: 100.8 l/h
Oil consumption at full load: < 0.2% of fuel consumption
Oil capacity including tubes and filters: 113 L
Total coolant capacity: 108 L
Regulator type: Electronic
Air filter type: Dry
Low refrigerant level detector
Exhaust gas compensator
4-stroke diesel engine
Water-cooled
24 V electric start
Standard air filter
Standard fuel filter
Standard oil filter
Radiator with blowing fan
High water temperature indicators
Low oil pressure indicators
Protection for hot parts
Protection for moving parts
Self-excited, self-regulated
4 Poles
Electronic regulation (A.V.R.)
IP23 protection
Class H insulation
Electric and power control, with measuring devices and controllers (according to needs and configuration)
Circuit breaker protection
Wired connection panel with safety protection (open circuit breaker protection and alarm)
Maintenance-free and explosion-proof battery
Battery switch
Battery charger (included in automatic control panels)
Preheating resistance with single-phase pump
Heating resistance (standard on automatic control panels)
Installed starter battery(s) (including support)
Electrical installation grounding, with connection provided for grounding rod (not included)
Steel frame
Emergency stop button
Antivibration mounts
Integrated fuel tank in the frame
Fuel level gauge
Tank drain plug
Sound level (7m) dB(A) – 80 + 2.4