Engine specifications 1.500 r.p.m.
Nominal output 74.6 kW prp; 82.0kW standby
ManufacturerFPT-IVECO
ModelNEF45 SM3
Engine type 4-stroke diesel
Type of injection Direct
Aspiration type Turbocharged
Cylinders, number and arrangement 4 – L
Diameter x stroke 104×132 mm
Total displacement 4.5 L
Refrigeration system Water + 50% Glycol
Specifications of ACEA E3, E5 engine oil
Compression ratio 17.5 1
Fuel consumption ESP 21.2 l/h
Fuel consumption at 100% GWP 19.4 l/h
Fuel consumption at 75% GWP 14.5 l/h
Fuel consumption at 50% GWP 9.6 l/h
Oil consumption at full load < 0.2% fuel consumption
Oil capacity including tubes, filters 12.8 L
Total amount of coolant 10 L
Mechanical Type Regulator
Dry Type Air Filter
Low refrigerant level detector
Exhaust gas compensator
Diesel motor
4 stroke
Water cooled
12V electric start
standard air filter
Standard fuel filter
Standard oil filter
Radiator with blower fan
High water temperature indicators
Low oil pressure indicators
Protection of hot parts
Protection of moving parts
Self-excited, self-regulated
4 poles
IP23 protection
Class H insulation
Electrical and power control, with measuring devices and controllers (according to needs and configuration)
Circuit breaker protection
Wired connection panel with safety protection (open circuit breaker protection and alarm)
Maintenance-free and explosion-proof battery
battery switch
Battery charger (included in automatic control panels)
Preheating resistor with single-phase pump
Heating resistor (standard on automatic control panels)
Starter battery(ies) installed (bracket included)
Earthing of the electrical installation, with connection provided for earth rod (not supplied)
Steel frame
Emergency stop button
Anti-vibration
Fuel tank integrated in the chassis
Fuel level gauge
Tank drain plug
Sound level (7m) dB(A) – 80 + 2.4